Адаптер FC PCI-X QLogic QLA2212F DP 2x1Гбит/с DualPort

Адаптер FC PCI-X QLogic QLA2212F DP 2x1Гбит/с DualPort
Товар бывший в употреблении. Прошел тестирование.
Гарантия: 3 месяца

Тип шины PCI/PCI-X
Скорость 66MHz
Порты Dual
Форм-фактор Standard
Hardware Supported PCI 2.1 Specification. 33 MHz and 66 MHz 64-bit PCI versions with PC98 power management support. Backward compatible to 32-bit PCI bus.
Operating Systems Supported Microsoft Windows 95/98 and Windows NT 4.0, Sun Solaris x86/SPARC, Novell NetWare 4.X, and UnixWare 2.1/7.0.
Onboard Memory Flash ROM BIOS, 128kb Static RAM, and a 4kb frame buffer for each of the two data channels.
Topologies Supported Point-to-Point, Arbitrated Loop, and Class 2 and 3.
Distance Between Nodes HSSDC copper 30 meters. Note: Signal retiming circuits may be required at each node. An MIA is required to convert from copper cable to singlemode or multimode optical fiber.
Interface Type HSSDC for copper cable connections. Twin SC for multi-mode optical fiber connections.
RISC RAM 128 Kbytes per Fibre Channel Controller
Onboard Intelligence Single chip engine includes integrated RISC processor, Fibre Channel Protocol manager, PCI DMA controller and 1Gb transceivers per Fibre Channel Controller
Onboard DMA Channels Three independent DMA channels per Fibre Channel Controller, two data and one command
Frame Buffers Integrated 4 Kbyte frame buffer FIFO for each data channel, GBIC models support optional external 16 Kbyte frame buffer per Fibre Channel Controller
Topology FC-AL, Point-to-Point, Fabric
Fabric Support FL_Port, F_Port
Class of Service Class 2,3
Transfers Full Duplex
Protocols SCSI, IP and FC-Tape, PCI boards support concurrent SCSI/IP
Host Bus PCI Local Bus Specification 2.1; cPCI-Hot Swap Specification 2.1; SBus — IEEE 1496-1993
Fibre Channel Data Transfers Up to 200 MB/s per channel with Full Duplex